Skip to main content

Stromleser

Updated

With this integration, you can connect your stromleser.one with our app. Your power consumption will then be automatically sent to us every minute.

Only for stromleser.one

This integration is only possible with stromleser.one device.

Part 1: Create a Push-API in our app

Step 1: Open the device overview

  1. Open our app
  2. Go to the Devices section.

Step 2: Add a new device

  1. Tap on Add device.

Step 3: Select measuring system

  1.  Select the Measuring system option.

Step 4: Select consumption measurement only

  1. Select Consumption measurement only.

Step 5: Select Push-API

  1. Select Stromleser as your connection method.

Step 6: Accept terms of use

  1. Read and accept the terms of use

Step 7: Copy Push-API key

  1. Generate a Push-API key
  2. You will now see a Push-API key.

  3. Copy this key you will need it shortly in the Stromleser app.

       

Keep the API key safe

It is best to copy the API key directly to your clipboard. You will need it for the next step in the stromleser app.

Part 2: Set up the connection in the stromleser app

Step 8: Open integrations

  1. Open the stromleser app
  2.     Go to Settings via the navigation bar.
  3.     Tap on Integrations.

  Open settings and integrations

Step 9: Select clever-PV

  1.     Select clever-PV from the list of available integrations.

  Select clever-PV integration

Step 10: Select device

  1. Select your stromleser.one device that you want to connect with our app

  Select device for integration

Step 11: Read integration description

  1. Read through the description of the integration
  2.     Tap on Next.

  Read integration and continue

Step 12: Paste and validate API key

  1.     Paste the Push-API key that you copied earlier in our app.
  2.     Tap on Validate connection.

  Paste API key and validate connection

Step 13: Check data in our app

  1.     Now check our app to see if data from your stromleser is already arriving.

  Check data in clever-PV

Step 14: Save configuration

  1.     If everything is working and you see data in our app, go back to the stromleser app  
  2.     Confirm with Yes to save the configuration.

  Data is being sent to clever-PV   Save configuration

Done!

From now on, your power consumption data will automatically be sent to our app every minute.

Setup complete

Your stromleser.one is now connected to our app. The consumption data   is automatically transmitted every minute.

Common issues

Validating connection fails

  •     Check whether you have copied and pasted the API key correctly.
  •     Make sure you have selected the Push-API option in our app.
  • Check your internet connection

Our app is not showing any data

  • Wait a few minutes after setup – data is sent every minute.
  • Ensure that your stromleser.one is providing current measurement data.
  • Check the stromleser app to see if readings are being displayed.

Lost API key

  •     You can create a new Push-API key in our app under Devices.
  •     Afterwards, you need to enter the new key in the Stromleser app.
Powered by Zendesk