You can install your Keba P40 with us via OCPP and thus intelligently control it.
You just need to put the OCPP Link from our App into your Keba P40:
Press in our App on "Device Adding" -> "Wallbox" -> "Keba P40".
Make sure that the Wallbox name does not contain "_" or " " spaces.
Also, note that the latest update 1.2.2 is installed on the Wallbox and you should reset to default settings. Then you can connect the Wallbox to us.
Next, we will put the OCPP Link from the App into the Wallbox:
Go to Settings:
Under OCPP Settings:
Enter Central System Hostname:: "cleverpv-ocpp.azurewebsites.net"
Under Central System Path enter the part of the link that comes after ocpp: "ocpp/xxxxxx"
The Central System Port is: 443
Troubleshooting
Question: "I have you as an OCPP-Backend registered and now I'm not getting connected to my Wallbox with the Keba App. What should I do?"
Answer: "This is a normal behavior when an OCPP-Backend is active. You can still use the Keba App in your home network. To do this, open the app, tap on the three dots at the top right and set the connection to 'Network'. So you connect locally to your Wallbox."